Rectangular Shaker Clutch Bag Silicone Mold with Findings

If you have a rectangular shaker clutch bag silicone mold with findings, the process of making the clutch will be similar to the steps outlined above. Here are the steps to follow:

1. Clean and dry your silicone mold.
2. Mix your epoxy resin according to the instructions on the package.
3. Pour a small amount of resin into the bottom of the mold, enough to cover the bottom completely.
4. Add your shaker fillings to the mold. You can use a toothpick or small spoon to place them carefully in the mold, making sure they are spread evenly throughout.
5. Add your findings, such as small charms or beads, to the mold.
6. Continue adding layers of resin, shaker fillings, and findings until the mold is filled to the desired height.
7. Allow the resin to cure for the recommended time.
8. Once the resin is fully cured, carefully remove the clutch from the mold.
9. Attach the metal frame and clasp to the clutch according to the manufacturer’s instructions.
10. Your rectangular shaker clutch bag with silicone mold and findings is now ready to use and enjoy!

How to make shaker clutch with resin ?

To make a shaker clutch with resin, you will need:

• A silicone mold in the shape and size of the clutch you want to make
• Clear epoxy resin and hardener
• Various small items to use as shaker fillings, such as beads, sequins, glitter, small charms, etc.
• Silicone glue or hot glue gun
• Clasp or chain to use as a handle for the clutch

Here are the steps to follow:

1. Prepare your silicone mold by cleaning it thoroughly and making sure it is completely dry.
2. Mix your epoxy resin according to the instructions on the package. You will need to mix equal parts of the resin and hardener together until they are well blended.
3. Pour a small amount of resin into the bottom of the mold, enough to cover the bottom completely.
4. Begin adding your shaker fillings to the mold. You can use a toothpick or small spoon to place them carefully in the mold, making sure they are spread evenly throughout.
5. Continue adding layers of resin and shaker fillings until the mold is filled to the desired height. Be sure to leave a small amount of space at the top of the mold to add your clasp or chain.
6. Allow the resin to cure for the recommended time, which is usually around 24 hours. Be sure to follow the curing instructions on your resin package carefully.
7. Once the resin is fully cured, carefully remove the clutch from the mold. If the clutch is difficult to remove, you can use a little bit of silicone or hot glue to help loosen it from the mold.
8. Attach your clasp or chain to the clutch using silicone or hot glue, making sure it is securely attached.
9. Your shaker clutch with resin is now ready to use and enjoy!